Special Setup; Display Setup - Kenwood DDX9018S Instruction Manual

Setup

Special Setup

You can setup special parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each parameter as follows.
■ [DEMO]
Select the demonstration mode. Default is
"ON".
[Software Information]
■
Confirm the software version of this unit.
(P.60)
[Open Source Licenses]
■
Display the open source licenses.
■ [Initialise]
Touch [Initialise] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
You can confirm the software version of this
unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
60
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

Display Setup

1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [Display].
h Display screen appears. h
4
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and buttons.
[ON]: Dims the display and buttons.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
NAV-SYNC: Activates or deactivates dimmer
according to the day/night display setting
of the connected navigation unit.
[OSD Clock]
■
Select if you want to display the clock while
watching DVD video, etc.
"ON" (Default)/ "OFF"
[Key Colour]
■
You can set the button illumination color.
(P.61)
[Wallpaper Customize]
■
You can change the wallpaper image or
color. (P.61)
[Viewing Angle]
■
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
"0" (Default)/ "-1"/ "-2"/ "-3"