Epson PriorityFax 3000 Owner's Manual page 25

PriorityFax 3000 Manual
1-12
Place the paper into the machine. Then pull approximately five
inches (15 cm) of paper from the top of the roll and carefully insert
the end of the paper under the paper cutter guide, as shown in the
illustration below. (Paper loading instructions are also printed
inside the fax machine.)
If you've inserted the paper correctly, it comes out through the
of the machine. Make sure that approximately four inches
front
(10 cm) of paper protrudes from the unit.
Push the recording paper cover shut until you hear a click. The
automatic cutter then cuts off the excess paper. The date/time
display appears and your fax machine is ready for use.
Note
Any time you open the recording paper cover, make sure
that the paper remains under the paper cutter guide when
you close the cover.