Table of Contents
Advertisement
Chapter 4
Reference:
When SNMP is not set to ON, an error occurs in "Get Device Status".
Start > Settings > Printers > Printer Properties > Device Settings >Get Device Status
4.2 Related Error code
4.2.1 The viewpoint of Error Codes
Error codes are four columns of codes that are recorded in transmission error report or reception error report when error happened.
It is able to check error codes in detailed information screen of the job log of the system status screen.
An error code is four columns of #XXXX with the output paper, but it is displayed with three columns of #XXX on the touch panel.
Refer to the following entry about error codes.
Error code details see below.
Color imageRUNNER C10360/C1030iF e-Manual
Troubleshooting > Error Codes
4-2
F-4-3
F-4-4
F-4-5
0025-5325
Advertisement
Table of Contents
