Settings For Toner Density - Canon MF9100 Series Service Manual

Chapter 2
There will be no detection or installation when there is no supporting driver in PC.
Supported PDL:
UFRII LT
PCL5c
PCL6
FAX
PS3
Setting is available in the following:
Additional Functions > System Settings > PDL Selection(PnP)

2.1.3 Settings for toner density

Settings for toner density:
The toner density for CMYK is made adjustable.
Details:
The setting item 'Toner Density' is created in 'Quality' - 'Details' - 'Advanced Settings' so that the setting for toner density of 'Cyan' , 'Magenta' , 'Yellow' , and 'Black'
can be made respectively.
The setting of toner density from -8 (lightest) to +8 (darkest) is made available, and the default is 0.
In the case that 'Toner Save' is set to 'Enables' , all items for 'Toner Density' are kept at the current values and grayed out, and the settings are made unavailable.
In the case of monochrome mode, the values of 'Cyan' , 'Magenta' , and 'Yellow' are kept at the current values and grayed out, and the setting only for 'Black' is
made available.
2-2
F-2-3
F-2-4
F-2-5
0025-5402