GE RAK148H2 Owner's Manual & Installation Instructions page 11

Press the
Press the RIGHT button to advance to the next screen.
Note: Default factory setting is 2°F/1°C for each stage.
4. Temperature Differential—Stage 2
(1–9°F/1–5°C) Heat Pump (HSH) only
Set the number of degrees between when
stage 1 turns on and stage 2 turns on.
Press the
Press the RIGHT button to advance to the next screen.
Note: Default factory setting is 2°F/1°C for each stage.
5. Minimum Cool Setpoint (60, 64, 66, 68,
70, 72, 74, 76°F) (15, 17, 19, 20, 21, 22,
23, 24°C)
Adjust to control the minimum Cool set
temperature allowed.
Press the
Press the RIGHT button to advance to the next screen.
Note: Default factory setting is 60°F/15°C.
6. Maximum Heat Setpoint (65, 70, 72, 74,
76, 78, 80, 85°F) (18, 21, 22, 23, 24, 26,
27, 29°C)
Adjust to control the maximum Heat set
temperature allowed.
Press the
Press the RIGHT button to advance to the next screen.
Note: Default factory setting is 85°F/29°C.
7. Room temperature offset (+9°F to –9°F)
(+5°C to –5°C)
Adjust to calibrate displayed room
temperature to match actual room
temperature.
Press the
Press the RIGHT button to advance to the next screen.
Note: Default factory setting is 0°F/0°C.
CONFIGURATION MODE
or button to set differential value.
or button to set differential value.
or button to select.
or button to select.
or button to select.
11