Loosing The Upper And Lower Installation Plates - Huawei RRU Hardware Maintenance Manual

RRU
Hardware Maintenance Guide
1.
2.
Step 3 Install the mounting brackets for the blade RRU.
1.
Issue 16 (2015-03-23)
Use an M6 Phillips screwdriver to loosen the upper and lower installation plates on the
non-blade RRU to be replaced, as shown in
Figure 4-25 Loosing the upper and lower installation plates
Pull the RRU to be replaced out of the ICR.
Remove the attachment plate from the rear of the RRU, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-25.
4 Replacing an RRU
Figure 4-26.
34