Ecc800; Product Configuration - Huawei FusionModule1000A20 Product Description

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 Prefabricated All-in-One Data

Center

Product Description (380 V)

Figure 3-34 Management system component layout (24 kW)

(1) ETH converter

(4) Temperature and

humidity sensor

(7) Camera

3.4.2 ECC800

The ECC800 edge intelligent controller is used to monitor the devices and environment in the

pre-fab. module. It consists of the power module and main control module. You can insert and

remove the power module.

Typical configuration: one power module and one main control module

Issue 01 (2019-10-31)

In the typical configuration, install a filler panel in slot 2.

(2) Access actuator

(5) Photoelectric smoke detector

(optional)

3 System Architecture

(3) ETH gateway

(6) Heat detector

(optional)

Table of Contents