General Maintenance - All Pond Solutions CUP-7000 Manual

General Maintenance

It is recommended that every 3-4 weeks you
perform maintenance on the CUP-7000.
Filter casing - can be removed by unfastening the
casing clips on the side of the filter body and
removing the filter casing.
Remove and clean filter sponge and filter media - remove the filter sponges
and sponge filter cage to access the media plate.
Rinse them in pond water to prevent damaging the beneficial bacteria which
help maintain a healthy pond.
Impeller - untwist the uv steriliser connector to separate it from the pump. The
impeller can be accessed by removing the pump's front casing. Simply rotate it
in anti clockwise direction.
The impeller can then be gently pulled away from
the housing and inspected.
Ensure that the plastic propeller part of the impeller
is attached to the ceramic part and that they have
not come apart or split. If this is the case you need to
replace your impeller.