Inverter With Cu240B-2 Control Units - Siemens SINAMICS G120 Operating Instructions Manual
Frequency converter
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
3.4.5.1
Inverter with CU240B-2 Control Units
The converter with CU240B-2 and CU240B-2 DP Control Units offers the following default
settings for its interfaces:
Automatic/local - Changeover between fieldbus and jog mode
Factory setting for converter with CU240B-2 DP Control Unit.
Refer to the following Section on how you can obtain the GSD file: Configuring
communication to the control (Page 102).
Motorized potentiometer
Two- or three-wire control
Macro 12 is the factory setting for converters with the Control Unit CU240B-2.
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2011, FW 4.4, A5E02299792B AB
Installing
3.4 Installing Control Unit
47
Advertisement
Table of Contents
