Attaching The Power Cord; Setting The Paper Feed Mechanism - Epson ActionLaser Original User Manual

Attaching the power cord

1. Before attaching the power cord, make sure that the power
switch on the left side of
the O side of the switch is pushed down.)
2. Attach the power cord to the socket at the back of the printer, as
shown below. Then plug the other end of the power cord into a
properly grounded outlet.
Note: Do not connect the printer to your computer until the next
chapter.

Setting the paper feed mechanism

Follow the steps below if you are using the printer for the first time
or if you just transported the printer:
have
1. Be sure the printer is turned off; then remove the paper cassette.
2. Turn on the power by pressing
marked with the vertical bar. The power indicator lights and a
PAPER EMPTY
printer is turned off. (It is off
the
message appears.
Assembling the Printer
side of the power switch
the
Setting Up the Printer
when
1-23