Epson ActionLaser Original User Manual page 27

drum unit, which you can recognize by the bright
4. Locate
the
green drum, and the cotton swab.
CAUTION: Do not expose the photosensitive drum to
light
any
is recommended
or sheet of paper whenever the drum is exposed. Also, do
not touch the surface of the drum.
5. Place the drum unit on a clean, smooth surface and locate
main charger wire, which extends along the length of the green
drum inside a slot in the silver bar directly over the drum. The
wire is silver and very thin, so it is difficult to see.
CAUTION: The main charger wire is very delicate. Do not
press
on
wire.
longer than necessary (a few minutes at most). It
you cover the drum with a soft cloth
that
it too hard or it may break. Also, never touch
Assembling the Printer
Setting Up the Printer
the
the
1-13