Epson ActionLaser Original User Manual page 166

Paper Jam Problems
Note: If the printer was recently transported, the paper feed
mechanism may need to be aligned to prevent further jamming.
See the section on setting the paper feed mechanism in Chapter 1
for details.
If the paper is jammed in the paper eject area, you can see it sticking
out of either the face-up or face-down output tray depending upon
the paper path selected. Simply remove it by pulling it out of the
printer.
If the jam is in the paper transport area, follow the steps listed below.
CAUTION: Because the toner on the paper inside the
printer may not have been fixed on the page, avoid
contact with it; it may come off on your hands while you
are removing the paper. When you resume normal
printing, the first page through the printer may be soiled
with excess toner.
Troubleshooting
7-10