Table of Contents
Advertisement
[PRIMARY DNS]
[SECONDARY DNS]
[IPv6 SETTING]
[ENABLE/DISABLE]
[DHCP]
[IP ADDRESS]
[PREFIX LENGTH]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[WLAN PROPERTY]
Performs settings related to the wireless LAN.
[MAC ADDRESS]
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
[INFRA(SELECT)]
[INFRA(MANUAL)]
(Factory setting: [DIRECT])
[SSID]
Enters or displays the network name of the camera (SSID). (32 characters or less)
(Factory setting: [AG-CX350]/[AJ-UPX360])
[BAND]
Switches between two communication methods ([2.4GHz] or [5GHz]) when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is
selected.
The items that can be set are as follows.
f [2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
[CHANNEL(2.4GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [2.4GHz]
The items that can be set are as follows.
f [AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
[CHANNEL(5GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [5GHz]
The items that can be set are as follows.
f [AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157],
[CH161], [CH165]
(Factory setting: [AUTO])
@
NOTE
t Some items may not be able to select depending on the used wireless module.
Chapter 4 Operation — Menu settings
Sets the primary DNS server.
f Factory setting: [0.0.0.0]
Sets the secondary DNS server.
f Factory setting: [0.0.0.0]
Sets whether to use IPv6.
[ENABLE]: Uses IPv6.
[DISABLE]: Does not use IPv6.
f Factory setting: [DISABLE]
Sets whether to use automatic acquisition via DHCP.
[OFF]: Does not use DHCP.
[CLIENT]: Performs automatic acquisition through DHCP.
f Factory setting: [OFF]
Sets the IP address.
f Factory setting: [::]
Sets the prefix length of the subnet.
f Factory setting: [64]
Sets the default gateway.
f Factory setting: [::]
Sets the primary DNS server.
f Factory setting: [::]
Sets the secondary DNS server.
f Factory setting: [::]
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet
terminal.
Connects to the wireless access point. The access point is selected from the list.
Connects to the wireless access point. Wireless access point is entered manually.
– 96 –
Advertisement
Table of Contents
