Table of Contents
Advertisement
[SD-SDI EDH]
Sets whether to superimpose EDH when output from the <SDI OUT> terminal is the SD signal (480i and 576i).
[ON]
[OFF]
(Factory setting: [ON])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t This cannot be set when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL].
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT> terminal.
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT> terminal. The settings of the zebra signal follow the zebra signal
settings in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the output image from the <SDI OUT> terminal.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t The setting is fixed to [SDR] when set to following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
‑ [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [OUT FORMAT] → [720×480i]
‑ [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [OUT FORMAT] → [720×576i]
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
[HDMI OUT]
[OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu → [FREQUENCY]/[FILE
FORMAT]/[REC FORMAT] setting.
[3840×2160p]
[3840×2160p(420/8bit)]
[1920×1080p]
[1920×1080i]
[1280×720p]
[720×480p]
[720×576p]
(Factory setting: [1920×1080p])
@
NOTE
t For the combinations that can be set, refer to "Format that can be output from the <HDMI> terminal" (page 158).
[HDMI TC OUT]
Sets if the time code information is output or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
Chapter 4 Operation — Menu settings
Superimposes.
Does not superimpose.
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Outputs in 3840×2160p (4:2:2/10-bit).
Outputs in 3840×2160p (4:2:0/8-bit).
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1280×720p.
Outputs in 720×480p.
Outputs in 720×576p.
– 82 –
Advertisement
Table of Contents
