Zanussi ZEFIST1001SS User Manual page 14

USING YOUR ELECTRIC INSET FIRE
Safety Protective Devices
The appliance is fitted with an over heat protection and safety
cut off system.
• Overheat protection - the power to the heating elements
will automatically cut off if the temperature of the heating
elements exceeds a certain limit. In the event of
overheating, the heater will stop operating. Switch the
appliance off and allow it to completely cool.
• This appliance is fitted with a safety cut-off which will
operate if the heater overheats (e.g. Due to blocked air
vents). For safety reasons, the heater will NOT
automatically reset. To reset the appliance, disconnect the
appliance from the mains supply for at least 15 minutes.
Reconnect the supply to the mains and switch on the
appliance.
Note: This appliance has LED light bulbs to create the flame
effect, therefore it should only be serviced by qualified
electricians.
14