Zanussi ZEFIST1001SS User Manual page 10

USING YOUR ELECTRIC INSET FIRE
Remote Operation
To activate the appliance by simply pressing the standby rocker switch which is
located at the front left-hand side of the product. The appliance will beep to
indicate that it is powered up.
It takes a couple of seconds for the receiver to respond to the transmitter. Do
not press the buttons more than once within two seconds for the fire to operate
normally.
•
Connect the power
•
Turn on the power switch
•
Press the "ON/OFF" key of the remote controller to start up
•
Press the 1000W button for the 1000W heat settings, and press twice to
switch off the heat setting.
•
Press the 2000W button for the 2000W heat settings; and press twice to
switch off the heat setting.
•
Press the DIMMER button for diming the flame effect.
10