Table of Contents
Advertisement
After towing the trencher to the desired location, follow these set-up instructions. Do not sit on the
trencher while setting it up.
1.) Remove outriggers from their vertical position and set them aside. This reduces weight. Outriggers are heavy, use
care when lifting.
2.) Be sure to remove the up-down and side-to side travel pins. Keep these two pins to re-insert for towing.
3.) Disconnect the trencher from the towing vehicle.
4.) Push lever #3 until wheels elevate off the ground 4-5 inches.
Digging Mode
side-to-side
travel pin
1 2
3
4
8
fig01386
up-down
travel pin
fig01382
fig01381
Advertisement
Table of Contents
