Connecting With Wireless Direct - Canon TR4700 Series Online Manual
Hide thumbs
Also See for TR4700 Series:
- Online manual (434 pages) ,
- Online manual (542 pages) ,
- Online manual (542 pages)
Table of Contents
Advertisement
Connecting with Wireless Direct
You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.
•
• Wireless connection (connecting devices via a wireless router)
•
• Direct wireless connection (connecting devices directly without a wireless router)
This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.
•
• Connecting
1.
Enable Wireless Direct for printer
2.
Connecting a smartphone/tablet/computer to the printer
• Changing settings
•
Changing Wireless Direct Setting
Important
•
• You can connect up to 5 devices to the printer at the same time with Wireless Direct.
•
• Check the usage restrictions and connect the printer to the Wireless Direct.
Restrictions
Enable Wireless Direct for printer
1.
1. Make sure the printer is turned on.
2. Press Setup button.
2.
The Setup menu screen appears.
3.
3. Select Device settings and press the OK button.
4.
4. Select LAN settings and press the OK button.
5.
5. Select Wireless Direct and press the OK button.
6. Select Switch WL Direct and press the OK button.
6.
7. Check displayed message, select Yes and press the OK button.
7.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.
Note
•
• After completing the settings, you can check the Network name(SSID), Security protocol, and
WL Direct net.(SSID) by pressing
button.
39
Advertisement
Table of Contents
Need help?
Do you have a question about the TR4700 Series and is the answer not in the manual?
Questions and answers
PAPER IS JAMMED AND i HAVE NOT BEEN ABLE TO REMOVE
To remove a paper jam from the Canon TR4700 Series printer, follow these steps:
1. Check the Paper Output Slot
- If the jammed paper is visible in the paper output slot, hold it firmly with both hands and pull it out slowly to avoid tearing.
- If you cannot remove the paper, turn the printer back on and see if it ejects automatically.
2. Check the Feed Slot of the Front Tray
- Raise the paper output tray and remove any loose paper from the front tray.
- If the jammed paper is visible in the feed slot, hold it with both hands and pull it out slowly.
3. Remove Paper from Inside the Printer
- If the paper is not visible in the output slot or feed slot, check inside the printer for any jammed paper.
4. Remove Paper from the Rear Side
- If the paper cannot be pulled out or is torn, open the printer’s rear cover and remove the jammed paper from the rear side.
5. Reload Paper
- Once the jam is cleared, reload paper in the front tray and ensure it is correctly loaded to prevent future jams.
- Avoid using A5 paper for printing photos or graphics, as it may curl and cause jams.
If the issue persists, check for any remaining bits of paper inside the printer.
This answer is automatically generated
can i enter the pw for a new network on my pc
how do you update firmware?
To update the firmware for the Canon TR4700 Series printer:
1. Make sure the printer is connected to the internet.
2. Go to the Setup menu on the printer.
3. Select "Install update" to start the firmware update.
4. Follow the on-screen instructions to complete the update.
If the update is not successful:
- Check the network settings.
- If the message "Cannot connect to the server; try again" appears, press the OK button and try again later.
You can also:
- Check the current firmware version under "Current version."
- Enable "Update notification" to receive update alerts on the printer's LCD.
- Enable "Auto update setting" to automatically install firmware updates.
This answer is automatically generated
my printer is printing blanks and seems to be running through print cartridges at some speeed
4700 will not return to print mode after making copies
Ho do I copy a document from PC to printer/copier