Changing The Print Options - Canon TR4700 Series Online Manual
Hide thumbs
Also See for TR4700 Series:
- Online manual (434 pages) ,
- Online manual (542 pages) ,
- Online manual (542 pages)
Table of Contents
Advertisement
Changing the Print Options
You can change the detailed printer driver settings for print data that is sent from an application software.
Specify this option if you encounter print failures such as part of an image data being cut off.
1.
1. Open the
printer driver setup window
2.
2. Click Print Options... on the Page Setup tab
The Print Options dialog box opens.
3.
3. Change the individual settings
If necessary, change the setting of each item, and then click OK.
The Page Setup tab is displayed again.
173
Advertisement
Table of Contents
Need help?
Do you have a question about the TR4700 Series and is the answer not in the manual?
Questions and answers
Ho do I copy a document from PC to printer/copier
can i enter the pw for a new network on my pc
PAPER IS JAMMED AND i HAVE NOT BEEN ABLE TO REMOVE
To remove a paper jam from the Canon TR4700 Series printer, follow these steps:
1. Check the Paper Output Slot
- If the jammed paper is visible in the paper output slot, hold it firmly with both hands and pull it out slowly to avoid tearing.
- If you cannot remove the paper, turn the printer back on and see if it ejects automatically.
2. Check the Feed Slot of the Front Tray
- Raise the paper output tray and remove any loose paper from the front tray.
- If the jammed paper is visible in the feed slot, hold it with both hands and pull it out slowly.
3. Remove Paper from Inside the Printer
- If the paper is not visible in the output slot or feed slot, check inside the printer for any jammed paper.
4. Remove Paper from the Rear Side
- If the paper cannot be pulled out or is torn, open the printer’s rear cover and remove the jammed paper from the rear side.
5. Reload Paper
- Once the jam is cleared, reload paper in the front tray and ensure it is correctly loaded to prevent future jams.
- Avoid using A5 paper for printing photos or graphics, as it may curl and cause jams.
If the issue persists, check for any remaining bits of paper inside the printer.
This answer is automatically generated
how do you update firmware?
To update the firmware for the Canon TR4700 Series printer:
1. Make sure the printer is connected to the internet.
2. Go to the Setup menu on the printer.
3. Select "Install update" to start the firmware update.
4. Follow the on-screen instructions to complete the update.
If the update is not successful:
- Check the network settings.
- If the message "Cannot connect to the server; try again" appears, press the OK button and try again later.
You can also:
- Check the current firmware version under "Current version."
- Enable "Update notification" to receive update alerts on the printer's LCD.
- Enable "Auto update setting" to automatically install firmware updates.
This answer is automatically generated
my printer is printing blanks and seems to be running through print cartridges at some speeed
4700 will not return to print mode after making copies