Toshiba TOSVERT VF-MB1 Function Manual page 33
Hide thumbs
Also See for TOSVERT VF-MB1:
- Instruction manual (350 pages) ,
- Function manual (49 pages) ,
- Manual (45 pages)
Table of Contents
Advertisement
[ VF-MB1/S15 ]
(Reserved)
[ VF-AS3 ]
2
Specified data
(Output terminal No.: 96, 97）
[ VF-MB1/S15 ]
(Reserved)
[ VF-AS3 ]
3
Specified data
(Output terminal No.: 98, 99)
[ VF-MB1/S15 ]
(Reserved)
[ VF-AS3 ]
4
Specified data
(Output terminal No.: 100, 101)
[ VF-MB1/S15 ]
(Reserved)
[ VF-AS3 ]
5
Specified data
(Output terminal No.: 102, 103）
[ VF-MB1/S15 ]
(Reserved)
[ VF-AS3 ]
6
Specified data
(Output terminal No.: 104, 105）
7-15
(Reserved)
Note: Set 0 to reserved bit
fa51 (Analog output (FM) data from communication)
7.5.6.
fa52 (Terminal AM output data) (Only for the VF-AS3)
Use this function, set the Terminal FM function (fmsl) or Terminal AM function (f670) to
communication data output (18 for VF-S15 / 31 for VF-AS3).
It possible to send out the data specified as FM/AM analog output data (fa51/fa52) though the
FM/AM analog output terminal. Data can be adjusted in a range of 0 to 100.0% (resolution of 10 bit).
Please refer to "Meter setting and adjustment" Section of the VF-S15/MB1 instruction manual for details.
Please refer to "Adjusting the meter connected to the inverter" Section of the VF-AS3 instruction manual
for more details.
f441 Power running torque limit level 1(Only for the VF-AS3)
7.5.7.
f443 Regenerative torque limit level 1(Only for the VF-AS3)
Torque limit level is set up by 0.01% unit and the hexadecimal number.
For example: when "Torque limit level " is set up to "250%", since the minimum unit is 0.01%,
250%=250÷0.01=25000=61A8H
f460 Speed control response 1(Only for the VF-AS3)
7.5.8.
Speed control response is set up by 0.01% unit and the hexadecimal number.
For example: when "Speed control response " is set up to "1.0%", since the minimum unit is 0.1%,
1%=1÷0.1=10=000AH
f461 Speed control stabilization coefficient 1(Only for the VF-AS3)
7.5.9.
Speed control stabilization coefficient is set up by 0.01% unit and the hexadecimal number.
For example: when "Speed control stabilization coefficient " is set up to "1.00%", since the minimum unit is
0.01%,
1%=1÷0.01=100=0064H
output 3
output 4
output 5
output 6
output ７
- 31 -
E6581738④
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
-
-
Advertisement
Table of Contents
