Drive/Driven Pulley And Belt Installation - CF MOTO CFORCE 1000 2018 Service Manual

CFMOTO

Drive/Driven Pulley and Belt Installation.

Use special tool(0800-052000-922-003) to
seperate the driven pulley discs.
Set the belt on drive pulley and driven
pulley.
Note:
The belt and pulley should not assembled
with oil or dirt still on the surfaces. Drive
belt arrow direction should be as same as
removal.
Install the CVT pulleys and belt together.
Use special tools and tighten the bolt and
nut to the specified torque.
Note: Drive pulley mounting bolt is
counterclockwise.
Drive pulley bolt torque: 60N·m.
Main drive shaft nut torque: 150N·m.
Tool:
CVT driven pulley locking wrench
0800-052000-922-001
CVT drive pulley wrench
0JY0-050000-922-001
05-124
5
2
Drive Driven Pulley
1 2
Pulley Stable Disc
Drive Driven Pulley Seperator
4 5
Belt (P/N: 0800-052000-922-003)
2
1
Drive Pulley
1 2
Mounting Bolt
1
4
0512401
3
Driven
3 Pulley Slide
Disc
0512402
Main Drive Shaft
Nut