Speed Limiter - Coleman Powersports AT125EX Owner's Manual

SPEED LIMITER

The ATV is equipped with a vehicle speed limiter adjusting screw. Beginning riders should start with
slowest setting to learn how to control this vehicle. Once the operator has demonstrated mastery of the ATV,
the supervising adult can adjust speed limiter screw to increase the top speed . The vehicle speed limiter
keeps the throttle from fully opening, even when the throttle lever is pushed to the maximum. The
adjusting screw may be gradually turned out as the beginner becomes more familiar with operating this ATV.
NOTICE
SPEED LIMITER ADJUSTMENT
To increase top speed
1. Loosen locknut (#1).
2. To increase the top speed of the ATV turn the adjustment screw counter
clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
To decrease top speed
1. Loosen locknut (#1).
2. To decrease the top speed of the ATV turn the adjustment screw clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
FRONT BRAKE LEVER
The front brake lever is located on the right side of the handlebar. To apply the front brake, pull the brake lever toward the handlebar grip.
REAR BRAKE LEVER
The rear brake lever is located on the left side of the handlebar. To apply the rear brake, pull the brake lever toward the handlebar grip.
The adjustable speed limiter screw must be installed for operation. Failure to install a speed limiter
screw may result in water or dirt ingestion and potential damage to the vehicle.
Adults should always limit maximum restricted
speed within the ability and capacity of the child to
operate the ATV safely. Never allow the child to
adjust the speed limiter screw.
8
1. Locknut
2. Adjustment Screw
3. Adjustment Range