Mitsubishi Electric Melsensor CF37-SR Settings Manual page 47

Test
This function can actually test for reading codes by using created settings.
Additionally, the number of trigger input can be set by using "Trigger On" and "Trigger Off" in the drop-down window of the
[Test] button.
Trigger On
20 ms
20 ms
20 ms
20 ms
20 ms
Note: The image transmission may be disabled when codes are read at high-speed because the speed may be limited by
reading settings, codes to be read, or a connection interface.
Trigger Off
1980 ms
980 ms
480 ms
180 ms
80 ms
Trigger occurrence frequency
0.5 times (0.5 Hz) per second
1 time (1 Hz) per second
2 times (1 Hz) per second
5 times (1 Hz) per second
10 times (1 Hz) per second
8 Application Steps
8.1 Optimize Image
8
45