Engine Coolant - Can-Am DEFENDER MAX Series 2021 Operator's Manual

MAINTENANCE PROCEDURES

Engine Coolant

Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Open cargo box.
219001807-008
3. Remove the pressure cap.
WARNING
In order to avoid potential burns,
do not remove the pressure cap if
the engine is hot.
4. Ensure cooling system is full up to
the Max line.
tmo2016-010-004_a
5. Add coolant in sy stem as neces-
sary. Use a funnel to avoid spillage.
Do not overfill.
______________
126
6. Properly reinstall pressure cap on
cooling tank.
7. Close service cover and lower cargo
box.
NOTE: A cooling system that fre-
quently requires addition of coolant
is an indication of leaks or engine prob-
lems.
Recommended Engine Coolant
XPS RECOMMENDED COOLANT
EXTENDED LIFE
PRE-MIXED
Scandinavia:
COOLANT (EUR)
(P/N 779223)
EXTENDED LIFE
PRE-MIXED
Other
COOLANT
Countries
(P/N 779150)
IF THE RECOMMENDED XPS
COOLANT IS NOT AVAILABLE
Distilled water and antifreeze solution
(50% distilled water, 50% antifreeze)
NOTICE
Always use ethylene-gly-
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
Engine Coolant Replacement
Cooling System Draining
WARNING
In order to avoid potential burns,
do not remove the pressure cap or
loosen the coolant drain plug if the
engine is hot.
1. Open cargo box.
2. Remove the cooling system pres-
sure cap.