Table of Contents
Advertisement
Chapter 2 Preparations
[Installing optional PCI card in slot PCI #1B, 2B, 3B, 1C, or 2C]
1.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the two screws securing the rise
card B. Hold the both ends of the riser card
B and lift it straight to remove.
3.
Confirm the installation position with the reference to the table in (1.13.2 Supported cards and available
slots).
4.
Remove the blank cover from the rise card
(common to PCI slots #1B to 3B, 1C, and
2C).
5.
Install a PCI card to the riser card.
When installing the card, position the
terminal part of the PCI card to the riser
card slot and insert it.
90
Note
Be careful not to contact with other parts.
Note
Keep the blank cover for future use.
Important
Do not touch the terminal part of riser cards or PCI cards and the signal pins
of electric parts installed on the card. Installing cards with dirt or oil can
cause malfunction.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
Screws
(1)
(2)
Advertisement
Table of Contents
