Table of Contents
Advertisement
Chapter 2 Preparations
(4)
Removing rail assemblies
Remove the rail assemblies from the rack by using the following procedure.
1.
Refer to Chapter 2 (2.1.2) - (3) Removal procedure to remove the server from the rack.
2.
Push the unlock lever on outer rail to the
direction shown by arrow to house the slide
rail.
3.
While pressing the lever on outer rail, push
the outer rail toward inside of the rack, then
remove it.
140
Unlock lever
Express5800/R120e-2E User's Guide
2. Installation and Connection
Locking mechanism
Front View
Rear view
Advertisement
Table of Contents
