Table of Contents
Advertisement
8
Post-Installation Check
Item
Content
The cabinet is installed properly. The cabinet should be secured. The
Cabinet
foreign matter inside the cabinet such as cable ties and cable cuts is
cleaned up.
Fan
The fan is secured. The fan has no foreign matter inside. The fan blades
rotate properly.
Water
The water pump is secured reliably and steadily. The water filter is
system
secured reliably and steadily. The float is secured. The sheet metal
fasteners are secured reliably. The high, low and water overflow liquid
level detector moves smoothly, and elastic cords are removed from the
high, low and water overflow floats. The water inlet pipe and drainpipe
are connected securely without leakage.
Cables are intact and free from sharp bends. No open or short circuit, or
Electrical
features
incorrect connection occurs in electrical loops. The power cables, signal
cable, teamwork control cable, and the T/H sensor cable for the smart
cooling product are connected as required. The rated specifications of
the upstream general switch meet the maximum current requirement.
All cables, connectors, and screws are secured. Devices are properly
grounded.
Water pan
The foreign matter inside the water pan is cleaned up, and water pan
filter is not blocked.
Compressor The transport fasteners of the compressor are removed. The bolts on the
compressor are tightened.
All pipes are wrapped with thermal insulation foam, and the insulation
Refrigerant
foam is intact. The needle valve plug is secured (torque of 0.45 ± 0.05
pipe
N· m), and valve bonnet is tightened.
Air filter
The air filter is correctly installed according to the air flow direction on
the frame. The protective cover of the air filter is removed.
20
Result
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
□ Passed
□ Failed
□Passed
□Failed
Advertisement
Table of Contents
