Table of Contents
Advertisement
RRU3260
Installation Guide
Figure 8-16 Removing the RRU main bracket
(1) Main bracket
Step 3 Install the third main bracket and install the third RRU onto the third main bracket. Then use
an inner hexagon torque screwdriver to tighten the captive screw into the connection holes on
the top of the attachment plate and main bracket for the RRU, with a torque of 5 N·m (44.25
lbf·in.), as shown in
The third main bracket must be installed with the opening ends of U-shaped slots on both
sides facing downwards.
Figure 8-17 Installing the third RRU onto the third main bracket
Issue 10 (2015-12-30)
Figure
8-17.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Pole installation bracket
8 Installing the RRU
60
Advertisement
Table of Contents
