Table of Contents
Advertisement
RRU3260
Installation Guide
Figure 9-29 Closing clips
Step 2 Insert waterproof blocks into vacant cable troughs in the cabling cavity, as shown in
9-30.
Ensure that cables and waterproof blocks are properly inserted into troughs.
Figure 9-30 Correct placement of waterproof blocks
Step 3 Close the cover plate of the RRU cabling cavity. Use an M5 torque screwdriver to partially
tighten the screws on the cover plate in the sequence shown in
screws to 2 N·m (17.7 lbf·in.) in the same sequence.
Issue 10 (2015-12-30)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing RRU Cables
Figure
Figure
9-31. Then tighten the
114
Advertisement
Table of Contents
