Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Master Forge MFJ576PNC
Summary of Contents for Master Forge MFJ576PNC
-
Page 2: Table Of Contents
TABLE OF CONTENTS Package Contents ....................... 3 Hardware Contents......................4 Safety Information ....................... 4 Preparation .......................... 5 Assembly Instructions......................6 Operating Instructions ....................... 16 Care and Maintenance ...................... 18 Warranty ..........................18 Replacement Parts List ..................... 19 Lowes.com/masterforge... -
Page 3: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY Side Shelf Ash Tray Side Shelf Support – Left Cart Rear Panel Rear/Right Front Right Cart Assembly Lid and Firebox Assembly Locking Caster Lid Handle Assembly Bottom Shelf Smoke Stack Assembly Right Door Assembly Charcoal Access Door –... -
Page 4: Hardware Contents
HARDWARE CONTENTS (shown actual size) M5 Shoulder Bolt M6x12 Bolt M6x20 Bolt Cotter Pin Qty. 41 Qty. 12 Qty. 8 Qty. 10 M5 Lock Nut M6 Lock Nut Qty. 8 Qty. 3 M6x30 Bolt Qty. 2 Hinge Bolt Wrench Qty. 4 Qty. -
Page 5: Preparation
SAFETY INFORMATION DO NOT or carports. A minimum clearance of 36 in. is recommended. DO NOT operate the unit under overhead construction. DO NOT use this appliance as a heater. ground. DO NOT DO NOT use this product in a manner other than its intended purpose. It is NOT intended for commercial use. -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTIONS 1. Attach two casters (U) to left cart assembly (V) and secure with wrench (HH). Hardware Used Wrench (not to scale) 2. Attach two lock casters (P) to right cart assembly (O) and secure with wrench (HH). Hardware Used Wrench (not to scale) 3. - Page 8 ASSEMBLY INSTRUCTIONS 7. Attach upper door brace (T) to the left cart assembly (V) and the right cart assembly (O). 8. Secure upper door brace (T) using four M6x12 bolts (AA). Hardware Used M6x12 Bolt 9. Attach ash tray handle (S) to left door assembly (W) using two M6x12 bolts (AA).
- Page 9 ASSEMBLY INSTRUCTIONS 10. Insert pin on the bottom of the left door assembly (W) into the hole on the bottom shelf (Q). Push the pin down on the top of the left door assembly (W) and insert it into the hole on the upper door brace (T).
- Page 10 ASSEMBLY INSTRUCTIONS 13. Attach damper (J) to inside of lid and bolts (CC) and four M5 lock nuts (GG). Repeat for remaining damper (J). NOTE: For clarity, illustration is shown with Hardware Used M5 Shoulder Bolt M5 Lock Nut 14. With side shelf (A) upside down, attach side shelf support –...
- Page 11 ASSEMBLY INSTRUCTIONS 16. Insert damper handle – right (L) into the two holes on right side damper (J). Secure with two cotter pins (DD). Repeat for damper handle – left (A1). Hardware Used Cotter Pin 17. Attach charcoal access door – left (F) to lid and (EE) into hinges on charcoal access door (F) and secure with cotter pins (DD).
- Page 12 ASSEMBLY INSTRUCTIONS assembly (C). 20. Attach smoke stack assembly (E) to lid and bolts (AA) and three M6 lock nuts (FF). NOTE: Make sure the smoke stack damper Hardware Used M6x12 Bolt M6 Lock Nut assembly (C) using two M6x12 bolts (AA). Hardware Used M6x12 Bolt Lowes.com/masterforge...
- Page 13 ASSEMBLY INSTRUCTIONS assembly (C). Secure with one cotter pin (DD). Repeat for remaining crank handle (H). Hardware Used Cotter Pin 23. Attach two charcoal trays (X) to inside of lid bolts (AA) each. Hardware Used M6x12 Bolt 24. Insert the divider panel (I) into the inside of the Lowes.com/masterforge...
- Page 14 ASSEMBLY INSTRUCTIONS assembly (C). 26. Attach one M6x30 bolt (II) on each side of lid Hardware Used M6x30 Bolt 27. Insert one end of warming rack (Z) onto M6x30 assembly (C). Repeat for other side. Lowes.com/masterforge...
- Page 15 ASSEMBLY INSTRUCTIONS 28. Fully tighten M6x30 bolts (II) on each side of lid Lowes.com/masterforge...
-
Page 16: Operating Instructions
OPERATING INSTRUCTIONS DANGER CARBON MONOXIDE HAZARD. Burning charcoal inside can kill you. It gives off carbon monoxide, which has no odor. NEVER burn charcoal inside homes, vehicles or tents. or lowered to desired height. This allows for different heat settings depending on the food you are cooking and the temperature at which you want to cook. - Page 17 OPERATING INSTRUCTIONS Rust can appear on the inside of your grill. Maintaining a light coating of vegetable oil on interior surfaces will aid in the protection of your grill. Exterior surfaces of the grill may need occasional touch up. The use of commercially available black high temperature spray paint is recommended. NEVER PAINT THE INTERIOR OF THE UNIT! Operating the Front Door, Dampers and Smoke Stack WARNING: These metal parts could be very hot while grilling.
-
Page 18: Care And Maintenance
GHP Group Inc. 8280 Austin Ave. Morton Grove, IL 60053-3207 Item Name: Dual Tray Charcoal Grill Model #: MFJ576PNC Item #: 0404332 Product Dimensions Assembled: 60.79 in. L x 26.97 in. W x 51.57 in. H Product Weight: 102.3 lbs Lowes.com/masterforge... -
Page 19: Replacement Parts List
Side shelf support – left 403-01004-02 handle, temp gauge, rear or right front (same) temp bezel, smoke stack, Bottle opener 403-01003-05 Master Forge badge Charcoal access door 404-03014-01 Master Forge badge 404-02002-02 frame only – right Temperature gauge – with... - Page 20 Cart door – left 405-03002-01 Divider panel 404-03006-01 Cart door – right 405-03002-02 Bottom cart panel 405-03001-04 Charcoal access door 404-03016-00 hardware Printed in China Master Forge & M Design® are registered trademarks of LF, LLC. All rights reserved. Lowes.com/masterforge...
Need help?
Do you have a question about the MFJ576PNC and is the answer not in the manual?
Questions and answers