Chapter 2. Installation
The finished assembly should look similar to the following figure. Note that the orientation of Item 2 may be
different.
Figure 8: Finished Right Angle Conduit Connection
2.4.4.1. Wiring Connection, Enclosure
On the Base Station enclosure end, connect the red cable from the conduit to the '+' terminal of the Solar Panel
Connection on the PCB and connect the black cable from the conduit to the '-' terminal of the solar panel
connection on the PCB as shown in the following figure:
Figure 9: Conduit Wire Connection in Base Station Enclosure
2.4.5.
Conduit Wiring Connection (Solar Panel End)
Refer to the following image for item callouts on the solar panel end of the conduit installation:
LUMEN TERRAIN User Manual
21