General Information; Using The Safety Instructions And Passing Them On To Others; Requirements For Safe Use - Bosch Rexroth MKE Series Project Planning Manual

14/131 Bosch Rexroth AG | Electric Drives
Safety Instructions for Electric Drives and Controls
3.2

General Information

3.2.1

Using the Safety Instructions and Passing Them on to Others

WARNING
3.2.2

Requirements for Safe Use

and Controls
● to be trained or instructed to maintain and use adequate safety equipment,
● to attend a course of instruction in first aid.
User A person installing, commissioning or using a product which has been placed
on the market.
Do not attempt to install and operate the electric components of the drive and
control system without first reading all documentation provided with the product.
Read and understand these safety instructions and all user documentation prior
to working with these components. If you do not have the user documentation
for the components, contact your responsible Bosch Rexroth sales partner. Ask
for these documents to be sent immediately to the person or persons respon‐
sible for the safe operation of the components.
If the component is resold, rented and/or passed on to others in any other form,
these safety instructions must be delivered with the component in the official
language of the user's country.
Improper use of these components, failure to follow the safety instruc‐
tions in this document or tampering with the product, including disabling
of safety devices, could result in property damage, injury, electric shock
or even death.
Observe the safety instructions!
Read the following instructions before initial commissioning of the electric com‐
ponents of the drive and control system in order to eliminate the risk of injury
and/or property damage. You must follow these safety instructions.
● Bosch Rexroth is not liable for damages resulting from failure to observe
the safety instructions.
● Read the operating, maintenance and safety instructions in your language
before commissioning. If you find that you cannot completely understand
the application documentation in the available language, please ask your
supplier to clarify.
● Proper and correct transport, storage, mounting and installation, as well
as care in operation and maintenance, are prerequisites for optimal and
safe operation of the component.
● Only qualified persons may work with components of the drive and control
system or within its proximity.
● Only use accessories and spare parts approved by Bosch Rexroth.
● Follow the safety regulations and requirements of the country in which the
electric components of the drive and control system are operated.
● Only use the components of the drive and control system in the manner
that is defined as appropriate. See chapter "Appropriate Use".
● The ambient and operating conditions given in the application documen‐
tation at hand must be observed.
● Safety-relevant applications are only allowed if clearly and explicitly speci‐
fied in the application documentation "Integrated Safety Technology". If
Rexroth MKE Synchronous Motors | Project Planning Manual