Cleaning & Storage - PowerXL Vortex Air Fryer Plus Owner's Manual

Cleaning & Storage
Clean the appliance after each use. The Basket and the Fry
Tray are coated with a special nonstick surface. Never use
abrasive cleaning materials or utensils on these surfaces.
1. Remove the Power Cable from the wall socket
and be certain the appliance is thoroughly cooled
before cleaning.
2. Wipe the outside of the appliance with a warm, moist
cloth and mild detergent.
3. Clean the Basket and the Fry Tray with hot water,
a mild detergent, and a nonabrasive sponge. The Fry
Tray is dishwasher safe. For difficult-to-remove food,
soak in hot soapy water for 10 minutes.
NOTE: The rubber bumpers on the Fry Tray are part
of the Fry Tray and should generally not be removed.
However, if the rubber bumpers need to be cleaned,
they can be removed and reattached: To remove
the rubber bumpers, locate the capped end of the
bumpers and push the capped end off of the Fry Tray.
There will be some resistance, but keep pushing until
the rubber bumpers come off of the Fry Tray. Take
note of the slot on which the bumpers were sitting. To
18
5-, 7-Quart PowerXL Vortex Air Fryer Plus™
reattach the rubber bumpers, align the hole in the rubber
bumpers with the slots from which the rubber bumpers
were removed. Slide the rubber bumpers all the way
back onto the slot on the Fry Tray.
4. Clean the inside of the appliance with hot water, a mild
detergent, and a nonabrasive sponge.
5. If necessary, remove unwanted food residue from
the heating element with a soft cleaning brush.
6. Rinse the appliance with a clean, damp cloth. Use a clean,
dry cloth to dry the appliance interior. Do not leave
standing water in the appliance.
7. If any other service needs to be performed, contact
Customer Service, using the contact information on the
back of this manual.
Storage
1. Unplug the appliance and let it cool down thoroughly.
2. Make sure all components are clean and dry.
3. Place the appliance in a clean, dry place.