Quick Start
Guide
IMPORTANT: Unpack all parts from the box and remove any clear or blue protective film on the components.
STEP 1
Fit the baskets with the
U-channel and Fry Trays to
assemble the large basket.
Push the basket into the
appliance and plug the
Power Cord into an outlet.
Wash components with warm, soapy water before first use.
FOR LARGE BASKET MODE
See the owner's manual for dual-basket assembly instructions.
STEP 2
Press the Power Button.
Press the Menu Selection Button
to scroll through the preset
settings until the preferred
setting is selected. Press the
Time and Temperature Control
Buttons to adjust if needed.
NOTE: Only Basket 1 needs
to be programmed when using
the large basket.
STEP 3
Take out the basket and
fill it with your food. Push the
basket back into the appliance.
Press the Start/Pause Button
to begin cooking.
Optional: Press the Shake Button
before pressing the Start/Pause
Button to be notified when
the cooking cycle is halfway
through the cooking time.
See owner's manual
for complete instructions
and important safety
information before
using this product.
STEP 4
When your food is done
cooking, remove and place
the basket on a heat-resistant
surface. Use tongs to transfer
food out of the basket.