Uv-Led Light; Precautions - Philips ADD4963 User Manual

Note: If there is not a secure connection between the hose cap and the connector on the
water dispenser, the water pump will operate but the water dispenser will not dispense water.
Make sure the hose is connected to the water dispenser correctly.
(3) Dispense water
· Plug the water dispenser into a grounded power outlet. The unit will pump the water from
the water bottle into the cooling and heating tanks.
· Press the hot water button until water ows out.
· Turn on the power switch on the back of the unit to heat or cool the water. The indicator light
will be on when heating or cooling is working. To get optimal temperature, do not turn o the
power switch until heating or cooling is done.
· Enjoy the hot or cold water you need.
· If you do not need hot or cold water, turn o the power switch to conserve energy.
Note: please wait until the water pump stops running before using the unit. If the water tank is
not full, no water will dispense from the water faucet.

UV-LED light

The UV-LED light is installed in the cold water tank to kill the bacteria which may grow inside.
It's controlled automatically by the software program once the dispenser is connected
with power.

5 Precautions

Warning
When using electrical appliances, basic safety precautions should be followed to reduce the
risk of re, electric shock, and injury to persons or property. Read all instructions before using
any appliance.
5