Table of Contents
Advertisement
Answer machine
Your BT3110 can record up to 12
minutes of messages. It can be used
via the base, handset and remotely
from any Touchtone™ telephone.
Using the answer machine from
the handset
Switch the answer machine on or
off and set the answer mode
1. Press
. Scroll
ANSW MACHINE and press
2. Scroll to ANSWER MODE and
press
.
3. Scroll
or
ANSWER ONLY, ANSWER + REC or
OFF and press
machine is on the
will light up.
If your answer machine is set to off,
choosing ANSWER ONLY or
ANSWER + REC will turn it on.
Outgoing messages
Your outgoing message is what your
callers hear when their call goes to
the answer machine.
With the pre-recorded messages,
you'll get two options. ANSWER +
REC lets callers leave a message;
ANSWER ONLY just answers your
calls. The default outgoing message
is ANSWER + REC.
28
or
to
.
to display either
. When the answer
button
Answer & Record
The pre-recorded Answer & Record
outgoing message that allows your
caller to leave a message is, "Hello,
your call cannot be taken at the
moment, so please leave your
message after the tone".
Answer only
The pre-record answer only
outgoing message, where callers
hear an announcement but can't
leave a message, is "Hello, your call
cannot be taken at the moment and
you cannot leave a message, so
please call later".
Record your own outgoing message
You can record either an ANSWER +
REC message or an ANSWER ONLY
message. If you chose ANSWER +
REC, your caller will be able to leave
a message. If you choose ANSWER
ONLY, they won't.
1. To record your own outgoing
message, press
2. Press
until you get to ANSW
MACHINE. Press
3. Then use the
OGM SETTING and press
4. Then use the
ANSWER + REC or ANSWER ONLY
and press
.
.
.
or
to find
.
or
to choose
- Quick Links:
- Quick Set-Up Guide
- Handset Display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BT3110 and is the answer not in the manual?
Questions and answers
How do I turn up ringer volume
To increase the ringer volume on the BT3110 base, follow these steps:
1. Press the button and scroll to PERSONAL SET, then press the button.
2. Press the button until you reach BASE TONE, then press the button.
3. RING VOLUME will be displayed. Press the button.
4. The base will ring at its current volume. Use the buttons to adjust the volume to your preferred level.
For adjusting the handset ringer volume, follow similar steps within the Handset Settings menu.
This answer is automatically generated
Hello, my mother's BT3110 smartphone is no longer recording messages. I've checked that it's set to answer and record, what should I try next?
If a BT3110 phone is not recording messages despite being set to answer and record, try these troubleshooting steps:
1. Check Answer Delay – Ensure the answer delay on the telephone line is set correctly. If another voicemail service answers first, adjust the delay settings.
2. Verify Answering Machine Settings – Ensure the answering machine is set to record messages and not just announce.
3. Test with Another Phone – Try using another known working answering machine or telephone on the same line to check if the issue is with the phone or the line.
4. Reset the Phone – Disconnect the batteries, line cord, and mains power. Wait for 10 minutes, then reconnect and test again.
5. Test on a Different Line – Use the phone on a different telephone line (e.g., a friend’s or neighbor’s) to see if the issue persists.
6. Contact Service Provider – If the issue continues, contact the service provider to check the telephone line.
These steps help determine whether the problem is with the phone settings, the line, or the service provider.
This answer is automatically generated
Answer phone, not smart phone. Dratted autocorrect. I should add, the "play" button is lit up and the screen on the phone shows an icon of a tape, as it should if record were working.
How do I find the keypad volume
To adjust the keypad volume on the BT3110, follow these steps:
1. Press the menu button.
2. Scroll to PERSONAL SET and press select.
3. Adjust the volume levels or turn them OFF using the keypad.
4. Press the save button to confirm your selection.
This answer is automatically generated
How do I clear the memory? The display says "MEMORY FULL"
To clear the memory on a BT BT3110 when it says "MEMORY FULL," delete old messages or memos from the answering machine. Play back messages and follow the prompts to delete them. This will free up space in the memory.
This answer is automatically generated