Table of Contents
Advertisement
Using the phone
Mute
1. During the call, press
your microphone. Your display
screen will show MUTE ON, so you'll
know your caller can't hear you.
2. Press
again to unmute.
The display will go back to showing
the call length.
Incoming speech /
Handsfree volume
To turn the volume up or down
during a call, use
When you press them, you'll hear
the volume change.
Handsfree
Handsfree lets you talk to your caller
without holding the handset. It also
means anyone in the room can listen
to the call as well.
1. Type the number you want to call
and then press
your call on the loudspeaker. Press
to switch between the earpiece
and loudspeaker.
2. Press
to end the call.
18
to mute
or
.
twice. You'll hear
Answering a call using handsfree
1. When your phone rings, press
after you've answered it. Your call
will be transferred to the handset
loudspeaker.
Switch to handsfree during a call
1. During a call, press
on loudspeaker. To switch handsfree
off and go back to the earpiece,
press
again.
Redial
You can redial any of the last ten
numbers you've called on your
BT3110.
Redialing the last number
1. Press
. Your last dialled
number will show on the display
screen.
2. Press
to call it.
Viewing and dialling a number in
the redial list
1. Press
. The last number
will show.
2. Press
or
number you want.
3. Press
to connect your call.
to put it
. to get to the
- Quick Links:
- Quick Set-Up Guide
- Handset Display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BT3110 and is the answer not in the manual?
Questions and answers
How do I turn up ringer volume
To increase the ringer volume on the BT3110 base, follow these steps:
1. Press the button and scroll to PERSONAL SET, then press the button.
2. Press the button until you reach BASE TONE, then press the button.
3. RING VOLUME will be displayed. Press the button.
4. The base will ring at its current volume. Use the buttons to adjust the volume to your preferred level.
For adjusting the handset ringer volume, follow similar steps within the Handset Settings menu.
This answer is automatically generated
Hello, my mother's BT3110 smartphone is no longer recording messages. I've checked that it's set to answer and record, what should I try next?
If a BT3110 phone is not recording messages despite being set to answer and record, try these troubleshooting steps:
1. Check Answer Delay – Ensure the answer delay on the telephone line is set correctly. If another voicemail service answers first, adjust the delay settings.
2. Verify Answering Machine Settings – Ensure the answering machine is set to record messages and not just announce.
3. Test with Another Phone – Try using another known working answering machine or telephone on the same line to check if the issue is with the phone or the line.
4. Reset the Phone – Disconnect the batteries, line cord, and mains power. Wait for 10 minutes, then reconnect and test again.
5. Test on a Different Line – Use the phone on a different telephone line (e.g., a friend’s or neighbor’s) to see if the issue persists.
6. Contact Service Provider – If the issue continues, contact the service provider to check the telephone line.
These steps help determine whether the problem is with the phone settings, the line, or the service provider.
This answer is automatically generated
Answer phone, not smart phone. Dratted autocorrect. I should add, the "play" button is lit up and the screen on the phone shows an icon of a tape, as it should if record were working.
How do I find the keypad volume
To adjust the keypad volume on the BT3110, follow these steps:
1. Press the menu button.
2. Scroll to PERSONAL SET and press select.
3. Adjust the volume levels or turn them OFF using the keypad.
4. Press the save button to confirm your selection.
This answer is automatically generated
How do I clear the memory? The display says "MEMORY FULL"
To clear the memory on a BT BT3110 when it says "MEMORY FULL," delete old messages or memos from the answering machine. Play back messages and follow the prompts to delete them. This will free up space in the memory.
This answer is automatically generated