ENGINE / COOLING SYSTEM
VALVE COVER INSTALLATION
q
1. Install spark plugs
TORQUE
Spark Plugs:
9 ft-lbs (12 Nm)
2. Prepare valve cover sealing surfaces by cleaning
thoroughly to remove all residue.
3. Inspect the valve cover seal
necessary.
4. Replace the isolators
5. Install the four valve cover shoulder bolts
isolators using a T40 driver.
6. Torque valve cover bolts in sequence to specification.
TORQUE
Valve Cover Bolts:
7 ft-lbs (10 Nm)
3.102
and torque to specification.
w
and replace if
e
around each T40 bolt.
r
and
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.