Connection With Plc - Mitsubishi Electric MELSEC-F FX3U-J1939 User Manual

FX -J1939 User's Manual
3U
3.1

Connection with PLC

The FX -J1939 connects on the right side of a PLC main unit/CPU Module or extension units/blocks
3U
(including special function units/blocks).
For connection to an FX
FX -1PS-5V is required.
3UC
For connection to an FX5U/FX5UC PLC, an FX5-CNV-BUS or FX5-CNV-BUSC is required.
For further information, refer to the respective PLC manual.
24
/FX Series PLC or FX
3GC 3UC
Refer to MELSEC iQ-F FX5U User's Manual (Hardware)
Refer to MELSEC iQ-F FX5UC User's Manual (Hardware)
Series PLC extension block, an FX
2NC
Refer to FX
Refer to FX
Refer to FX
Refer to FX
3 Installation
3.1 Connection with PLC
-CNV-IF or
2NC
Hardware Edition
3G
Hardware Edition
3GC
Hardware Edition
3U
Hardware Edition
3UC