Led Mode Select Button And Indicator Leds; Reset Buttons - Aruba 6000 Series Installation And Getting Started Manual

Switch LEDs
PoE mode LED
Speed mode
LED
UID LED
Global Status
Indicator LED
* Press the LED mode button to switch between Link/Activity (default), PoE, or Speed.

LED mode select button and indicator LEDs

The state of the switch port LEDs is controlled by the LED Mode select button. The current view mode is
indicated by the mode LEDs next to the button. To step from one view mode to the next, press the button
to cycle through the different modes.

Reset buttons

The Reset button is recessed from the front panel. (This design protects it from being pushed accidentally.)
The button is accessible through small holes on the top of the front panel. Use pointed objects, such as
unbent paper clips, to push it.
To accomplish this:
Soft reset
Hard reset
(missing or bad snippet)
Function
Indicates Port LEDs are
showing PoE information
(not applicable for non
PoE switches)
Indicates Port LEDs are
showing speed
information
User-configurable LED
Overall status of the
product
Press and release the Reset button.
Press and hold the Reset button for more
than 5 seconds, then release.
State
Off
On - Green
Slow Flash - Amber
On - Amber
Off
On - Green
Off
On/Flash - Blue
Flash - Green
On - Green
Flash - Amber
On - Amber
Do this:
Meaning
PoE mode not selected
PoE mode selected
Hardware failure PoE enabled
port, PoE mode not selected
Hardware failure PoE enabled
port, PoE mode selected
Speed mode not selected
Speed mode selected
User defined the located LED :
OFF
User defined the locator LED:
On/Flash
Self-test in progress during
UBOOT, SVOS and AOS-CX
Successfully initialized AOS-CX
Recoverable faults (e.g. fans,
PSU fault)
Critical faults (e.g. exceed
temperature limit)
This will happen:
The switch operating system is
cleared gracefully. The switch then
reboots and runs self-tests.
The switch reboots, similar to a power
cycle. A hard reset is used, for
example, when the switch CPU is in
an unknown state or not responding.