Miele H 7640 BM Operating And Installation Instructions page 11


If the oven is delivered without a power cord, a special cord must
be installed by a Miele authorized technician (see "Installation –
Electrical connection").

If the power cord is damaged, it must be replaced with a special
power cord by a Miele authorized technician (see "Installation –
Electrical connection").

During installation, maintenance, and repair work, the oven must
be completely disconnected from the power supply. To ensure this:
- The circuit breakers have been switched off, or
- the fuses of the electrical installation have been completely
removed, or
- the plug (if present) is removed from the outlet. To do this, pull the
plug not the cord.

The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g., by installing heat insulation strips in the cabinet niche).
In addition, the required supply of cool air must not be excessively
heated by other heat sources.

If the oven is built in behind a cabinet door front, do not close the
cabinet door while the oven is in use. Heat and moisture can build
up behind the cabinet door when closed. This can result in damage
to the oven, cabinet niche, and floor. Leave the cabinet door front
open until the oven has cooled down completely.
Correct use

Caution: Heating elements may be hot even though they are not
glowing. Interior surfaces of an oven become hot enough to cause
burns. External parts of the oven such as the door glass, vents, and
the control panel can become hot. During and after use, do not
touch, or let clothing or other flammable materials come into contact
with heating elements or interior surfaces of the oven until they have
had sufficient time to cool.
IMPORTANT SAFETY INSTRUCTIONS
11