Warming Crockery; Heating Up Times; Capacity - Miele ESW 7010 Operating And Installation Instructions

Warming crockery

Tips
- Spread the dishes out across the
whole surface if possible. Tall stacks
of plates will not warm up as rapidly
as individual dishes. If you cannot
avoid stacking plates, place these at
the front of the drawer.
Use the wire rack (depending on
model).
- Do not place large serving dishes
right up against the vents. They will
cover the warm air outlets. The
dishes will not heat up evenly.
- For cups and glasses, only select the
 "Warming cups/glasses" operating
mode to ensure that the maximum
temperature (60 °C) is not exceeded.
- Heated dishes cool down very
quickly. For that reason you should
not remove it from the drawer until
just before you need it.

Heating up times

Various factors will affect the heating up
times:
- The material and thickness of the
dishes
- Load size
- How the load is arranged
- Temperature selection
26
It is therefore not possible to state
precise times. For even heating with the
 "Warming dishes/plates" operating
mode, the following values can be used
as a guide:
- 30–35 minutes for 6 place settings to
heat up evenly
- 40–45 minutes for 12 place settings
to heat up evenly
As you use the appliance, you will get
to know which settings suit your own
needs best.

Capacity


Risk of damage due to
overloading.
Overloading the drawer will damage
the telescopic runners.
The maximum load bearing capacity
of the drawer is 25 kg.
The capacity will depend to a great
extent on the size and weight of your
dishes.
ESW 7020, ESW 7030, ESW 7120: the
loading area can be increased by using
the wire rack supplied with the drawer.
The wire rack can be used in a variety
of ways. You can also increase the
loading area using 2 wire racks
positioned on the left and right. An
additional wire rack is available to order
via the Miele webshop, the Miele
Customer Service Department or from
your Miele dealer (see "Optional
accessories").