Operation
Using the appliance
Malfunction due to dirty and/or
covered sensor controls.
The sensor controls do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor controls and
indicators clean.
Do not place anything over the
sensor controls or indicators.
Damage caused by liquids.
Liquids that get inside the drawer
can cause a short circuit.
Open and close a loaded drawer
carefully to prevent liquids from
spilling.
20
Open the drawer.
Touch the sensor control to switch
the drawer on.
Touch the sensor control
repeatedly until the required
operating mode lights up.
Touch the sensor control
repeatedly until the segment for the
required temperature lights up in the
temperature display.
Touch the sensor control
repeatedly until the required number
of hours for the operating duration
lights up.
Close the drawer.