Focus; Auto White Set; Freeze - JVC AV-P1000U Operating Instructions Manual

FOCUS

● Press the FOCUS buttons to adjust the focus.
● Press the NEAR button to focus on the upper (closer) part
of the object and the FAR button to focus on the lower
(farther) part.
Note :
Focusing range is up to 100 mm from the stage sur-
face.

AUTO WHITE SET

● This adjusts the picture tone.
● Shoot a white sheet of paper in full screen and press the
AUTO WHITE SET button. The indicator blinks until the white
balance is set. When the white balance setting is complete,
the indicator stops blinking and remains lit.
* Even though the auto white set mode is engaged, the tone
is not adjusted unless this button is pressed.
* When the lighting changes, perform the auto white set op-
eration again.
* The auto white set mode and the manual mode can be switched
with the ON-SCREEN ADJUSTMENTS (p. 14 and 15).
Note :
In the manual white balance mode, this button has no
effect. In this case, "MANUAL WB" is shown briefly in
the upper left of the screen for confirmation.

FREEZE

● This freezes the picture from the camera and displays it as a
still image. The indicator lights.
● Press again to release the still mode. The indicator goes out.
● When the split mode is engaged using the ON-SCREEN AD-
JUSTMENTS, the screen is divided. The still picture is shown
on one side and the current camera picture on the other. The
indicator blinks.
* For the split mode setting, refer to p. 14 and 15.
Note :
When the still mode is engaged, zoom, focus and iris
adjustments are not possible. Also, the VIDEO OUT
button has no effect.
ON-SCREEN ADJUSTMENTS FOCUS
LIGHTS IRIS MENU/ENTER
NEAR
VIDEO PC FREEZE AUTO WHITE
SET
OUT
ON-SCREEN ADJUSTMENTS FOCUS
LIGHTS IRIS MENU/ENTER
VIDEO PC FREEZE AUTO WHITE NEAR
SET
OUT
ON-SCREEN ADJUSTMENTS FOCUS
LIGHTS IRIS MENU/ENTER
VIDEO PC FREEZE AUTO WHITE NEAR
SET
OUT
ZOOM
1 PRESET 2
TELE WIDE
FAR
DIGITAL
ZOOM
1 PRESET 2
TELE WIDE
FAR DIGITAL
ZOOM
1 PRESET 2
TELE WIDE
FAR DIGITAL
11