ABB FlexPendant Product Manual page 24

2 Installation
2.3 Connecting the cables
Continued
Connecting the retractable cable, IRC5
Use this procedure to connect the FlexPendant to the retractable cable.
1
2
3
4
5
6
Continues on next page
24
Action
Remove the small cover over the connectors
on the back of the FlexPendant.
Lift the strain relief from its guides to loosen
the cable.
Push the tab fasteners and pull out the con-
nectors.
• Connector Black Dish
• RJ45 Connector
Push the connectors for the retractable cable
in place.
Put the strain relief in the recess.
Put the housing cover in place.
Tighten the screws.
© Copyright 2015-2016 ABB. All rights reserved.
Note
xx1400000782
xx1300002543
xx1300002544
Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B