The Connection Of The Grounding Wire; The Connection Of Input Cable - Panasonic YD-500GP5 Operating Instructions Manual

6.2 The connection of the grounding wire

●The yellow-green wire of the input cable is the ground wire.
●One side of the ground wire has been reliably grounded to the chassis inside the welding power source.
●Reliably ground the other side of the ground wire.

6.3 The connection of input cable

●Disconnect the switch of the distribution box (user's equipment).
●Connect the other side of the input cable to the output terminal of the
switch of the distribution box.
Connection
Water supply pipes, building iron frames, etc. do not serve as sufficient
ground. Do not connect any grounding wire to them.
• Install one distribution box each for this product.
21
No. Name
Input cable
a
Input power
b
Distribution box
c
switch
d
Input side cable
e
Note:
Do not use a wrench to tighten.
Tightening torque: 2.45 N•m- 3.40 N•m
Note
User equipment
User equipment
User equipment
Equipment comes with