ACCELERATOR AND BRAKE PEDAL GROUP
13
2518a
THROTTLE POSITION SENSOR
The pedal group for the vehicle includes a throttle position sensor mounted on the side of the accelerator pedal
assembly. The throttle position sensor detects the position of the accelerator pedal and sends a voltage to the solenoid
and forward/reverse limit switches. The throttle position sensor itself is not intended to be replaced. If sensor is
determined to need replacing through test procedures found in this manual, the accelerator pedal assembly must be
replaced. See Accelerator Pedal Removal on page 5-6.
3
2
4
8
6
5
Figure 5-4 Pedal Group – Gasoline Vehicle
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Pedal Group – Gasoline Vehicle
1
11
12
10
9
7
5
Page 5-5
Need help?
Do you have a question about the Precedent and is the answer not in the manual?
Questions and answers