Problem Solving Guide; Technical Problems - Miele G 7154 Operating Instructions Manual

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
This section only lists faults that you can remedy yourself. All other faults are
shown in 
Fault FXX

Technical problems

Problem
The dishwasher will not
start.
The dishwasher stops
during a programme.
.
Possible cause and remedy
The door is not closed properly.
 Raise the door upwards until the catch engages.
The dishwasher is not plugged in or the socket is not
switched on.
 Insert the plug and switch on at the socket.
The circuit breaker has tripped.
 Reset the circuit breaker in the mains fuse box
(see data plate for minimum fuse rating).
 If the circuit breaker trips again, call Miele.
The dishwasher is not switched on.
 Switch the dishwasher on with the  button.
The circuit breaker has tripped.
 Reset the circuit breaker in the mains fuse box
(see data plate for minimum fuse rating).
 If the circuit breaker trips again, call Miele.

Problem solving guide

73