Standard settings
Switching on the dishwasher
Open the door.
Switch the dishwasher on with the
button.
The welcome screen will appear when
the dishwasher is switched on.
For further information about the
display functionality, see "Guide to the
appliance - Display functions".
Setting the language
The display will change automatically to
the screen for setting the language.
Select the language and the country,
if applicable, using the buttons
and confirm with OK.
For further information on setting the
language, see "Settings - Language".
A tick will appear next to the
language that has been set.
Using for the first time
Setting the water hardness
The display will change to the screen
for setting the water hardness.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale), always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °dH in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________ mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
0.36 mmol/l (2 °dH - German scale).
Set the water hardness level in your
area and confirm with OK.
See "Settings - Water hardness" for
more information.
21