Sealey GSA53 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Read instruction Wear eye
manual protection
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.

 WARNING! Disconnect from air supply before changing accessories or servicing.
 Maintain the tool in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are secure.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and non essential persons away from the working area.
 DO NOT use the tool for a task it is not designed to perform.
 WARNING! DO NOT use tool if damaged or thought to be faulty. Contact a Sealey service agent.
 DO NOT use tool unless you have been instructed in its use by a qualified person.
 DO NOT carry the tool by the air hose, or yank the hose from the air supply.
 DO NOT operate tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
 DO NOT carry tool with your hand on the power trigger in order to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION
Third Generation air shears features contoured and insulated handle to protect operator from the effects of vibration and chill. Smooth
operating mechanism suitable for cutting straight lines in steel sheet up to 1.2mm thickness.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . GSA53
Maximum cutting capacity: . . . . . 1.2mm(Steel)
Air consumption:. . . . . . . . . . . . . . . . . . . . 4cfm
Operating pressure: . . . . . . . . . . . . . . . . . 90psi
Noise Power: . . . . . . . . . . . . . . . . . 105.91dBA
Noise Pressure: . . . . . . . . . . . . . . . . 94.91dBA
Vibration: . . . . . . . . . . . . . . . . . . . . . . 2.71m/s²
Uncertainty: . . . . . . . . . . . . . . . . . . . . 0.46m/s²
© Jack Sealey Limited
INSTRUCTIONS FOR:
AIR SHEARS
GSA53
MODEL NO:
Wear ear Wear hand
protection protection
Original Language Version
GSA53 Issue: 4(SP) - 21/10/14